Most of the time I use it to support a reflector or off-camera flash. While not my primary tripod it's the one most often behind the seat of my pickup truck so it's handy for any need. It's better suited to something like a smaller dSLR and kit zoom, P&S compact camera or small video camera. The heaviest kit I've used with it is a Nikon F3HP with MD-4 motor drive and 180mm f/2.8 Nikkor, and this was really pushing the limits of the tripod's stability. Because the friction clamp can slip under heavy pressure it's not suitable for very heavy loads. The legs can be spread to all kinds of crazy angles and locked in position using a friction fit clamp. The inset photo shows the bottom of the camera with the quick release post, which fits into a corresponding hole in the tripod head and is locked in place with a camming mechanism. Mounting the head on the leg for low angle use is handy for some macro photography. That's a Olympus OM-2N and, if memory serves, 80-200 Kiron zoom. In this illustration the tilt/pan head was detached from the center post and mounted on the accessory bolt on the leg for low angle use. SLIK Tripods - U212 / U212 Deluxe Crank Handle Replacement Slik Tripods 357 subscribers Subscribe 9 Share 2.2K views 6 years ago 1319 SLIK USA Customer Service Specialist, Glenn Nash. It is an oddball, but a good value in a compromise for the person who wants one compact, lightweight tripod to serve interchangeably for still cameras, video cameras and to support accessories such as off-camera flash or reflectors. This photo may help illustrate the quirks Craig mentioned about the Slik U212 Deluxe. At that price range you're buying not only stability but finer incremental adjustments, quick release systems that won't endanger your equipment (the quick release devices on cheaper tripods should not be trusted - virtually all rely on friction fit and may work loose unexpectedly), and the ability to support 300mm or longer fast telephotos. For serious wildlife, sports or architectural and landscape photography, figure on spending a lot more money, probably closer to $500 or more. These are still only general purpose tripods. With a budget of around $200 you can get a sturdier tripod that can support the same weight with even less wobble, or support a bit more weight, and which will be taller - important if you're 5'10" or taller since stooping to use the smaller tripods can be tiresome. All are good, lightweight kits that can support a few pounds of camera and lens well enough for most purposes. "Cheap, light & good tripods for a kiev 60?", Īt around roughly $100, I've owned and can recommend the Slik Able 300DX, Bogen/Manfrotto 3001 (with 3028 Super 3D tilt/pan head, unfortunately no longer available) and the Slik U212 Deluxe. I also need to stay as light as possible since I will beĬarrying it everywhere on my already hefty backpack.Here's a some recent discussions where the pros and cons of various affordable tripods are discussed: What do you recommend in a comparable price range. Which is actually better, why, and if you don't care for these, The deluxe is $99Īnd the 300 is $119, but the deluxe "reads" better than the 300. Yet as they were out of stock and just came in. Would you recommend either of these? I haven't seen them in person The 330 DX is a lightweight - about 3.5 lbs.Īnyone using the 330 or 400? I'm wondering if I should bear the burden and go with the 400 instead. Also, once I hefted the 300 it felt like a lot of weight to carry on the back of my Mini Trekker. It's got the flip latch legs that I want. The didn't have the 330 DX in stock but it read well and I ordered it. I like the quick release flip latches that the 330 DX, 400 DX, and 700 DX have. I don't like having to turn the screws - it's too slow for me. I went to get the 300DX today but discovered in the store that the 300 has horrible leg adjustments for me.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |